Scale N stop and go

Discussing things related to model railoading in general
Post Reply
Posts: 1
Joined: Sun 31. May 2015, 14:28

Scale N stop and go

Post by barnie » Sun 25. Sep 2016, 12:49

I have a N scale layout, checked all the connections OK but loocs would run and stop at random. Cleaned the tracks but.... still stop and go. if it stops and I give it a tiny nudge it will go another meter or so. Maybe my cleaning is not good enough any good and easy ways to clean the trecks better.

Posts: 2
Joined: Tue 29. Oct 2019, 18:18

Re: Scale N stop and go

Post by AlecDavies » Thu 31. Oct 2019, 13:24

I would suggest to clean it properly and try again. if possible please share some picture.

Post Reply