When I connect two pieces with the Smart Insert “Connect with Flex Track,” does the program only connect if it can do so without generating aa ess curve (two opposite curves joined together)?
I have a long gentle in my layout, and there is a right curve at the beginning and a left curve at the the end - I can’t tell by looking if there is a straight section between the curves,
Does “Connect with Flex Track” prevent ess curves?
-
- Posts: 1
- Joined: 30 Dec 2021, 21:05
- RailModeller Support
- Posts: 571
- Joined: 24 Nov 2014, 17:27
- Contact:
Re: Does “Connect with Flex Track” prevent ess curves?
Hi Mike,
The flex connect function looks at both tracks to be joined;
If the tracks are mostly parallel (and a connection is possible) they're connected with an ess curve (flex with 4 control points)
If the tracks can be joined with some curved shape - the imagined extensions of each track cross each other - then a curved track is created (flex with 3 control points)
RailModeller Pro uses bezier curves internally to allow freely bent flex tracks, not just a series of curves.
Hope this helps,
Jan
The flex connect function looks at both tracks to be joined;
If the tracks are mostly parallel (and a connection is possible) they're connected with an ess curve (flex with 4 control points)
If the tracks can be joined with some curved shape - the imagined extensions of each track cross each other - then a curved track is created (flex with 3 control points)
RailModeller Pro uses bezier curves internally to allow freely bent flex tracks, not just a series of curves.
Hope this helps,
Jan
RailModeller Pro - The model railroad layout design package for the Mac
Twitter: https://twitter.com/RailModeller
YouTube: https://youtube.com/c/IsleoftheKakapo
Instagram: https://www.instagram.com/railmodeller
Facebook: https://fb.me/RailModellerPro
Twitter: https://twitter.com/RailModeller
YouTube: https://youtube.com/c/IsleoftheKakapo
Instagram: https://www.instagram.com/railmodeller
Facebook: https://fb.me/RailModellerPro