Auto-joining tracks with multiples of a standard track

Questions, tips and tricks, "How can I..."
Post Reply
SimonB
Posts: 7
Joined: Mon 14. Oct 2019, 21:15

Auto-joining tracks with multiples of a standard track

Post by SimonB »

When joining to widely distanced tracks, you're only offered the choice of "Generic Flextrack" if the gap is longer than (say) Peco Code 100 Flextrack (914mm). It'd be handy for determining amount of track lengths to buy if the joining length of track could instead be composed of multiples of standard length flextrack plus a partial sub-piece to complete the link.
Sheldon Cooper
Posts: 7
Joined: Mon 28. Jan 2019, 18:13

Re: Auto-joining tracks with multiples of a standard track

Post by Sheldon Cooper »

I agree this would be a useful feature. At the moment one has to add sections of flextrack manually and bend them by eye to the generic one.
Post Reply